Evo One with FTX64-2W
2 way remotes operate the door locks and trunk.
Remote start results in no crank.
Side lights come on for a few seconds, go off, and then flash 4 times. I have checked all the wiring multiple times.
I just pulled the glove box and there isn't a factory starter based on the info in this doc.
PT398-08100 Rev. B.pdf
I don't see any voltage on yellow A1.
sevice# 002B02156111
So my module is from 2016 and the guide says you need 2019 and firmware 79.59 minimum. The one I have will only flash to 76.56. Going to buy a new module and see what happens with the correct hardware & firmware.